ROLAND GS2-24 NOVA GENERACIJA REZAČA FOLIJA
Roland rezači folija (Cutteri)Roland VersaStudio GS2-24 rezač folije. Roland GS2-24 je potpuno redizajnirani rezač folije iz segmenta desktop verzije strojeva za rezanje raznih vrsta folija i drugih materijala. Kompletno novo kućište i držač nožića omogućuju GS2-24 rezaču bolju stabilnost i jači pritisak na materijal koji se izrezuje, te ujedno omogućuje rezanje debljih folija i materijala. Novo dizajnirani displej, poboljšano izrezivanje sitnijih detalja, povećana i poboljšana brzina rezanja od 10-850 mm/sec te preciznost rezanja na većim brzinama. Novi Roland GS2-24 dolazi sa poboljšanim pritiskom na aplikaciju od 30-500 grama (gf) što je 39,5% više od svojog prethodnika Gs-24 rezača, što znači da novi GS2-24 može rezati vrlo krute i čvršće materijale poput magnetne folije te ima mogućnost overlap rezanja za čak 10x. Crop Mark Recognition, ili poboljšano konturno izrezivanje očitavanjem zadanim markerima.
Roland GS2-24Uz ovaj Roland dolazi novi CutStudio software, upotpunosti dizajniran za Rolandove rezače folija, omogućiti će vam da u samom softweru mjenjate veličinu, rotirate i zrcalite svoju grafiku. CutStudio podržava BMP, JPG, STX, AI, i EPS file format, te se može rezati direktno iz Adobe Illustrator ili Corel Draw-a. Također reže True Type fontove bez potrebe za outline linijom ili napustom.
Drive systemDigital control servo motor
Cutting mechanismMedia-moving method
Acceptable
material sizeWidth50 – 700 mm (1.97 in. – 27.5 in.)
LengthRoll material: no restriction
Flat material: 100 mm (3.94 in.) or more
Maximum cutting area584 mm (Width) × 25,000 mm (Length) (22.9 in. × 984 in.)
Usable tools• CAMM-1 series blade (ZEC-U5032 / U5022 / U5025 / U3017)
• Flat Bed blade (ZEC-U1715 / U3050 / U3075 / U3100)
• Window film blade（ZEC-U5010)
Cutting speed10 – 850 mm/s (0.39 – 33.4 in./s)
Blade force30 – 500 gf
Mechanical resolution0.0125 mm/step (0.49 mil./step)
Software resolution0.025 mm/step (0.98 mil./step)
Distance accuracy*1Error of less than ±0.2% of distance traveled or 0.1 mm (3.94 mil.), whichever is greater
Repeatability *1, *20.1 mm (3.9 mil) or less
Alignment accuracy for cutting printed material *1, *3±1 mm (±39.4 mil.) or less for movement distance of 210 mm (8.3 in.) or less in material-feed direction and movement distance of 170 mm (6.7 in.) or less in width direction (Does not take influence of printer and material into account)
Connectivity• Ethernet (automatic switching between 10BASE-T and 100BASE-TX)
• USB 2.0 (FULL SPEED compliant)
Replot memory2 MB (buffer size: 8 MB)
Command systemCAMM-GLⅢ
Power supplyDedicated AC adapter
Input: 100 – 240 Vac, 50/60 Hz
Output: 24 Vdc 2.7 A
Rated current1.0 A
Power consumptionApprox. 24 W
Acoustic noise level During operation70 dB (A) or less
During standby40 dB (A) or less
Outer dimensions860 mm (Width) × 319 mm (Depth) × 235 mm (Height) (33.9 in. × 12.6 in. × 9.3 in.)
Weight13.5 kg (30 lb.)
EnvironmentTemperature5 – 40 °C (41 to 104 °F)
Humidity20 – 80 %RH (no condensation)
Included itemsPower cord, AC adapter, Blade, Blade holder, Roller base, USB cable, Alignment tool, Manuals
Roland GS2-24Uz ovaj Roland dolazi novi CutStudio software, upotpunosti dizajniran za Rolandove rezače folija, omogućiti će vam da u samom softweru mjenjate veličinu, rotirate i zrcalite svoju grafiku. CutStudio podržava BMP, JPG, STX, AI, i EPS file format, te se može rezati direktno iz Adobe Illustrator ili Corel Draw-a. Također reže True Type fontove bez potrebe za outline linijom ili napustom.
- Specifikaciju Roland GS2-24 preuzmite ovdje
- Brošuru Roland GS2 24 preuzmite ovdje
- User manual preuzmite ovdje
Drive systemDigital control servo motor
Cutting mechanismMedia-moving method
Acceptable
material sizeWidth50 – 700 mm (1.97 in. – 27.5 in.)
LengthRoll material: no restriction
Flat material: 100 mm (3.94 in.) or more
Maximum cutting area584 mm (Width) × 25,000 mm (Length) (22.9 in. × 984 in.)
Usable tools• CAMM-1 series blade (ZEC-U5032 / U5022 / U5025 / U3017)
• Flat Bed blade (ZEC-U1715 / U3050 / U3075 / U3100)
• Window film blade（ZEC-U5010)
Cutting speed10 – 850 mm/s (0.39 – 33.4 in./s)
Blade force30 – 500 gf
Mechanical resolution0.0125 mm/step (0.49 mil./step)
Software resolution0.025 mm/step (0.98 mil./step)
Distance accuracy*1Error of less than ±0.2% of distance traveled or 0.1 mm (3.94 mil.), whichever is greater
Repeatability *1, *20.1 mm (3.9 mil) or less
Alignment accuracy for cutting printed material *1, *3±1 mm (±39.4 mil.) or less for movement distance of 210 mm (8.3 in.) or less in material-feed direction and movement distance of 170 mm (6.7 in.) or less in width direction (Does not take influence of printer and material into account)
Connectivity• Ethernet (automatic switching between 10BASE-T and 100BASE-TX)
• USB 2.0 (FULL SPEED compliant)
Replot memory2 MB (buffer size: 8 MB)
Command systemCAMM-GLⅢ
Power supplyDedicated AC adapter
Input: 100 – 240 Vac, 50/60 Hz
Output: 24 Vdc 2.7 A
Rated current1.0 A
Power consumptionApprox. 24 W
Acoustic noise level During operation70 dB (A) or less
During standby40 dB (A) or less
Outer dimensions860 mm (Width) × 319 mm (Depth) × 235 mm (Height) (33.9 in. × 12.6 in. × 9.3 in.)
Weight13.5 kg (30 lb.)
EnvironmentTemperature5 – 40 °C (41 to 104 °F)
Humidity20 – 80 %RH (no condensation)
Included itemsPower cord, AC adapter, Blade, Blade holder, Roller base, USB cable, Alignment tool, Manuals
- *1 According to material and cutting conditions as specified by Roland DG Corporation.
- *2 • Excluding expansion/contraction of the media
- • Length in sheet feed direction: Within 1600 mm (62.9 in.)
- *3 According to measurement standards as specified by Roland DG Corporation.
• Software must be included Roland DG Corporation software.
• Assumes use of a laser or inkjet printer with a resolution of 720 dpi or greater.
• Excludes glossy and/or laminated material.
• Excludes effects of warped printing due to accuracy of printer or effects of expansion/contraction of material.
• May not be read correctly by the sensor depending on the printer ink (black) used.
